10/12 roof pitch
A 10/12 pitch rises 10 inches for every 12 inches of horizontal run — an angle of 39.8° (83% grade). Here is the slope, what it means for materials, and how it changes your roof area.
| Slope multiplier | 1.3017 |
|---|---|
| Angle | 39.8° |
| Grade | 83% |
| Walkability | Very steep |
Not safely walkable without staging, harnesses, and fall protection.
What a 10/12 roof is used for
Very steep roofs — A-frames, Gothic, and decorative steep gables. Striking, but harder and costlier to work on.
Materials suitable for a 10/12 roof
Building codes set a minimum pitch for each material because roofs shed water by gravity — too shallow and water works back under the courses. These are IBC/IRC minimums; always confirm the manufacturer's data sheet, since installing below the minimum voids warranties.
| Material | Min pitch | Note |
|---|---|---|
| Asphalt shingles | 2:12 | 2:12 minimum with double underlayment; 4:12 recommended for single-layer |
| Clay & concrete tile | 2½:12 | 2½:12 minimum with double underlayment; 4:12 typical |
| Metal panels (exposed fastener) | 3:12 | 3:12 minimum without lap sealant |
| Metal shingles / wood shingles | 3:12 | 3:12 minimum |
| Slate & wood shakes | 4:12 | 4:12 minimum |
| Standing seam metal | ¼:12 | ¼:12 possible with mechanically-seamed premium systems |
How 10/12 affects roof area
Footprint area understates a pitched roof. Multiply the footprint by the multiplier (1.3017) to get true surface area. A 1,500 sq ft footprint at 10/12 becomes about 1,953 sq ft of roof — roughly 20 squares before waste, or about 23 squares with 15% waste.
Estimate a 10/12 roof
Build your roof with the pitch preset to 10 in the full roofing material calculator, or convert this pitch on the pitch calculator.